| |
This tuning kit is based on
Volkswagen's 1989-90 Golf II GTI Limited. Only 70 cars have been made by
Volkswagen Motorsport with this G-Lader powered 1.8l-16v G60 engine.
It produces 210HP/247Nm @
8.8:1 compression.
The ultimate tuning upgrade for your
Volkswagen. You can purchase all items you need to
build it yourself or let us do it for you.
However, this great 16V-G60 engine conversion
is easily done if you have all the following
items:
|
|
| Required
16V Items: |
- Engine block 16V
- Cylinder head 16V
- Scirocco 16V Air Intake System
- Distributor,
complete
- Alternator
- exhaust manifold
- manifold flex-pipe
|
|
| Required
G60 Items:
|
- G60
Lader
- G-Lader mounting brackets and belt tighter
- G-Lader exhaust (silencer box)
- Serpentine pulleys for Water pump and Alternator
- Throttle Body, complete
- Fuel Injectors and Pressure Regulator
- Idler Valve
- Digifant1 ECU
- Engine Wire Harness
- Oxygen Sensor
- Water Temperature Sensor (blue)
- CO%
Potentiometer
- Relays, Fuel Pump
- Pressure Hoses to and from the G-Lader
- Lower Water Pump Pipe
- Radiator
- Catalytic Converter
(if needed)
|
|
|
|
All you need now is our
16VG60 conversion Kit to ensure a clean and
easy installation.
|
|
| |
Our
16VG60 conversion Kit includes the following items:
- Special cylinder head gasket, metal
- Engine/crank breather system
- By-pass pipes and hoses
- Special Rod Bearings
- Water distributor for Water temperature Sensors
- Stainless Steel Fuel Rail
- Crank Shaft Pulley
- Bracket for Pulley and Serpentine Belt guiding Roller
- Alternator
mounting brackets
- Serpentine Belt
(to use with 70mm G-Lader pulley)
- 70mm G-Lader Pulley
- Hydraulic/Spring Loaded
tensioner ,Cylinder Head
- Bracket for the Hydraulic/Spring Loaded Tensioner
- Hoses for Intake Manifold and Throttle Body
connections
- Stainless Steel By-Pass lines
- Special Spark Plugs
|
$2500.00
|
|
|
Note:
Our
conversion kit is based on the original 'Golf GTI 16V
Limited' G60 powered
engine and is laid out for 250HP.
If you are planning on higher power outputs we
recommend the use our special pistons for 16VG60 or turbo engines.
The
estimated time of delivery is 3 weeks after order placement.
Special Options:
- 16VG60
Set of Pistons complete (PG/1H
Engines): $
1059
- 16VG60 Chip
(7400 RPM)
:
$500
- 16VG60
Engine
assembly:
$800
- 16VG60
Installation
into a CorradoG60 and Dyno-run:
$1500
- Rallye
Golf Intercooler installation in CorradoG60:
$2500
- Over
Pressure Valve, adjustable:
$300
All
engines built and installed in house carry a 1 year limited warranty.
|
|
